| ID
|
Image (click for Larger)
|
Years of Production
|
Original Cost
|
Jaw Width
|
Opening Width
|
Weight
|
Anvil
|
Replaceable Faces
|
Pipe Clamp
|
Base Type
|
Other
|
| No 3 |
 Image from old salvage on GarageJournal.com in this thread @ this post
|
|
|
1.25 |
|
|
N |
N |
N |
Clamp |
|
| No 015 |
 Image from Zoomieport
|
|
|
5" |
|
40lbs |
Y |
Y |
Y |
Swivel |
|
| No 79 |
 Image from old salvage on GarageJournal.com in this thread @ this post
|
|
|
3.125 |
|
|
N |
Y |
N |
Fixed |
"1884" cast into movable jaw
|
| No 86 |
 Image from senlow on GarageJournal.com in this thread @ this post
 Image from Harvey Melvin Richards on GarageJournal.com in this thread @ this post
|
|
|
1.50 |
|
|
N |
N |
N |
Clamp |
LS Starrett branded Athol
Note that in the second example image, Harvey has a Starrett129 bench block base on his.
|
| No 91 |
 Image from Goldhawg on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
N |
N |
Fixed, Cornered |
|
| No 114X |
  Images from BanjoSavesTheDay on GarageJournal.com in this thread @ this post & this post
|
|
|
4" |
|
28lbs |
N |
Y |
N |
Fixed, Cornered |
Athol M&FC. Athol Mass, Made in USA
Restoration Thread on GarageJournal.com by BanjoSavesTheDay
|
| 323½ |
 Images from ZRX61 on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
N |
Y |
Swivel |
|
| 324½X |
 Image from NAYLOR on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
Y |
Y |
Swivel |
|
| 614 |
  Images from sawatch on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
Y |
N |
Fixed, Cornered |
|
| 614 1/2 |
 Image from ZRX61 on GarageJournal.com in this thread @ this post
 Image from johnnybentwrench on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
Y |
N |
Once example is Fixed, the other is Fixed & Cornered |
Athol Mass. Made in USA
Different bases between the two example images most likely from different manufacture time periods.
|
| 615 |
 Image from csargents1546 on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
N |
N |
Fixed, Cornered |
|
| 623 1/2 |
 Image from Low Friction on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
Y |
N |
Swivel |
Starret 623½
|
| 624 |
 Image from Dave A on PracticalMachinist.com in this thread @ this post
|
|
|
4.5" |
|
|
N |
Y |
N |
Swivel |
|
| 624 |
 Image from SBLatheman on PracticalMachinist.com in this thread @ this post
|
|
|
4.5" |
|
|
N |
Y |
N |
Swivel |
Starrett Branded
|
| 624½ |
 Image from Catalyze on GarageJournal.com in this thread @ this post
|
|
|
|
|
|
N |
Y |
N |
Swivel |
|
| 677 |
 Image from BanjoSavesTheDay on GarageJournal.com in this thread @ this post
|
|
|
2" |
|
|
N |
Y |
N |
Swivel (missing in this image) |
|
| 706 |
  Images from Zoomieport on GarageJournal.com
|
|
|
2.5" |
|
|
N |
N |
N |
Swivel |
Stationary main handle
|
| 923C |
 Image from Low Friction on PracticalMachinist.com in [1] @ this post
|
|
|
3" |
|
28lbs |
Y |
Y |
N |
Swivel |
|
| 924 ½ |
  Image from Low Friction on GarageJournal.com in [2] @ this post
|
|
|
4.5" |
8" |
~60lbs |
Y |
Y |
N |
Fixed |
|
