Reed Vise
Originally posted here: http://dayid.org/tools/reedvise.html, but that page now just redirects here.
You can see the original source here: http://dayid.org/tools/reedvise_backup.html.
Since getting my Reed No 23, I've been hunting for information about them, so here's a little bit of information about the ones I have found. The majority of the information here was originally sourced from Garage Journal & Practical Machinist.
ID | Image (click for Larger) | Years of Production | Original Cost | Jaw Width | Opening Width | Weight | Anvil | Replaceable Faces | Pipe Clamp | Base Type |
---|---|---|---|---|---|---|---|---|---|---|
No 1C | http://dayid.org/images/Tools/Vise/Reed/reed1c.t.jpg | 3.5 | 7.5 | N | Y | Y | Swivel | |||
No 2C | http://dayid.org/images/Tools/Vise/Reed/reed2c.t.jpg | 4.5 | 6+ | 100lbs+ | N | Y | Swivel | |||
No 3C | http://dayid.org/images/Tools/Vise/Reed/reed3c.t.jpg | 8 | N | Y | Y | Swivel | ||||
No 31 | http://dayid.org/images/Tools/Vise/Reed/reed31.t.jpg | N | N | Y | Swivel |